Wilo-EMU KS

Submersible wastewater pump

• For draining excavation pits, basements, shafts and basins
• Intended for use in wells

Technical data

• Mains connection 1~230 V, 50 Hz or 3~400 V, 50 Hz
• Protection class IP 68
• Submersion depth 12 m max.
• Fluid temperature 40 °C max.
• Cable length 10 m
• Free ball passage depending on type, 5 mm - 10 mm
• Pressure port depending on type Rp 1 1/4, Rp 2 or Rp 3

Materials

• Motor: cast aluminium
• Pump: cast iron
• Impeller: cast iron
• Shaft: 1.4021
• Mechanical seal on motor side: steatite/carbon (KS 8 / KS 9 / KS 14 / KS 15), carbon/aluminium oxide (KS 24)
• Mechanical seal on pump side: SiC/SiC
• Static seals: NBR

Source: www.tiarasakti.co.id

Wilo-P

Glandless pump with screwed or flange connection. Pre-selectable speed stages for capacity adjustment

Hot-water heating systems of all kinds, industrial circulation systems

Technical data

• Permitted temperature range +20 °C to +130 °C; in short-term operation (2 h) +140 °C
• Mains connection 3~400 V, 50 Hz (P 40/100r also 1~230 V, 50 Hz)
• Protection class IP 42
• Nominal width DN 40 to DN 100
• Max. operating pressure 6 bar or 10 bar, also optional up to 16 bar

Materials

• Pump housing: cataphoretic coated cast iron
• Impeller: plastic/cast iron
• Shaft: stainless steel
• Bearing: metal-impregnated carbon

Source: www.tiarasakti.co.id

Wilo-Star-RS (ClassicStar)

Glandless circulation pump with screwed connection. RSL version with rapid ventilation connection. Pre-selectable speed stages to adjust the capacity

Hot-water heating systems of all kinds, industrial circulation systems, cold-water systems and air-conditioning systems

Technical data

• Permitted temperature range -10 °C to +110 °C
• Mains connection 1~230 V, 50 Hz
• Protection class IP 44
• Nominal width Rp 1/2, Rp 1 or Rp 1 1/2
• Max. operating pressure 10 bar

Materials

• Pump housing: Grey cast iron (EN-GJL200)
• Impeller: Plastic (PP - 40% GF)
• Shaft: Stainless steel ( Cr)
• Bearing: Metal-impregnated carbon

Source: www.tiarasakti.co.id

Wilo-VeroLine-IP-E

Electronically controlled glanded pump, inline design with flange connection and automatic output adaption

For pumping cold and hot water (according to VDI 2035) without abrasive substances in heating water, cold water and cooling water systems

Technical data

• Permitted temperature range -10 °C to +120 °C
• Mains connection 3~400 V, 50 Hz
• Protection class IP 55
• Nominal width DN 32 to DN 80
• Max. operating pressure 10 bar (special version: 16 bar)

Materials

• Pump housing and lantern: EN-GJL-250
• Impeller: PP, glass fibre reinforced
• Shaft: 1.4021
• Mechanical seal: AQ1EGG other mechanical seals on request

Source: www.tiarasakti.co.id

Wilo-VeroNorm-IP-Z

Glanded circulation pump, inline design with screwed connection

For pumping drinking water and also cold and hot water (according to VDI 2035) without abrasive substances in heating water, cold water and cooling water systems

Technical data

• permitted temperature range
• Drinking water up to 28 °d: max. +65 °C, in short-term operation (2 h) up to +110 °C
• Heating water: -8 °C to +110 °C
• Mains connection 1~230 V, 50 Hz,3 ~400 V, 50 Hz
• Protection class IP 44 motor, IP 54 terminal box
• Nominal width Rp 1
• Max. operating pressure 10 bar

Materials

• Pump housing and lantern: 1.4306
• Impeller: Noryl
• Shaft: 1.4571
• Mechanical seal: ceramic/graphite/EPDM

Source: www.tiarasakti.co.id

WILO-VeroNorm NP

Single-stage low pressure centrifugal pump mounted on base plate

• Pumping heating water according to VDI 2035, water-glycol mixtures, cooling, cold and process water
• Applications in municipal water supply, irrigation, building service, general industry, power stations, etc.

Materials

• Pump housing: ENGJL250
• Impeller: ENGJL25, optional bronze CuSn80
• Shaft: X30Cr13
• Mechanical seal: AQ1EGG

Source: www.tiarasakti.co.id

WILO-VeroNorm NPG

Single-stage low pressure centrifugal pump mounted on base plate

• Pumping heating water according to VDI 2035, water-glycol mixtures, cooling, cold and process water
• Applications in municipal water supply, irrigation, building service, general industry, power stations, etc.

Materials

• Pump housing: ENGJL250
• Impeller: ENGJL250
• Shaft: depending on type X30Cr13

Source: www.tiarasakti.co.id

WILO-VeroTwin-DP-E

Electronically controlled glanded twin-head pump, inline design with flange connection and automatic output adaption.

For pumping cold and hot water (according to VDI 2035) without abrasive substances in heating water, cold water and cooling water systems

Technical Data

• Permitted temperature range -10 °C to +120 °C
• Mains connection 3~400 V, 50 Hz
• Protection class IP 55
• Nominal width DN 32 to DN 80
• Max. operating pressure 10 bar (special version: 16 bar)

Materials

• Pump housing and lantern: EN-GJL-250
• Impeller: PP, glass fibre reinforced
• Shaft: 1.4021
• Mechanical seal: AQ1EGG; other mechanical seals on request

Source: www.tiarasakti.co.id

WILO-VEROTwin-DPL

Glanded twin-head pump, inline design with flange connection

For pumping cold and hot water (according to VDI 2035) without abrasive substances in heating water, cold water and cooling water systems.

Technical Data

• Permitted temperature range -10 °C to +120 °C
• Mains connection 3~400 V, 50 Hz
• Protection class IP 55
• Nominal width Rp 1 to DN 100
• Max operating pressure 10 bar (special version: 16 bar

Material

• Pump housing and lantern: EN-GJL-250
• Impeller: Plastic / EN-GJL-200 (depending on pump type)
• Shaft: 1.4021 (Version N: 1.4404)
• Mechanical seal: AQ1EGG; other mechanical seals on request

Source: www.tiarasakti.co.id

WILO: Magnet Pump

Application:
* Circulation and transference of chemical liquid
* Filter treatment such as dyeing equipment
* Etching equipment for electronic parts
* Constant temperature bath and ion analyzer

Features:
* Non seal type (magnet drive): No leakage

Advantages:
* ong-lasting by adopting a closed motor

Benefits:
* Suitable to handle dilute acid liquid

Source: www.tiarasakti.co.id

WILO: Cronoline IL

Glanded pump, inline design with flange connection

For pumping cold and hot water (according to VDI 2035) without abrasive substances in heating water, cold water and cooling water systems

Technical data

• Permitted temperature range -20 °C to +140 °C
• Mains connection 3~400 V, 50 Hz
• Protection class IP 55
• Nominal width DN 32 to DN 250
• Max. operating pressure 16 bar

Materials

• Pump housing and lantern: Standard: EN-GJL-250; optional spheroidal graphite iron EN-GJS-400-18-LT
• Impeller: Standard: EN-GJL-200; Special version: Red bronze G-CuSn 10
• Shaft: 1.4122
• Mechanical seal: AQ1EGG; other mechanical seals on request

Source: www.tiarasakti.co.id

WILO: Cronobloc BL

Glanded pump, monobloc design with flange connection

For pumping cold and hot water (according to VDI 2035) without abrasive substances in heating water, cold water and cooling water systems

Technical data

• Permitted temperature range -20 °C to +140 °C
• Mains connection 3~400 V, 50 Hz
• Protection class IP 55
• Nominal width DN 32 to DN 150
• Max. operating pressure 16 bar

Materials

• Pump housing and lantern: Standard: EN-GJL-250; optional spheroidal graphite iron EN-GJS-400-18-LT
• Impeller: Standard: EN-GJL-200; Special version: Red bronze G-CuSn 10
• Shaft: 1.4122
• Mechanical seal: AQ1EGG; other mechanical seals on request

Source: www.tiarasakti.co.id

WILO-Comfort-Vario COR MHIE/VR

Pressure boosting system with 2 to 4 non-self-priming stainless steel high pressure centrifugal pumps connected in parallel equipped with speed-controlled motors

• Fully automatic water supply and pressure boosting in residential, office and administration buildings, hotels, hospitals, stores and also in industrial systems
• Pumping of drinking water and process water, cooling water, fire-fighting or other process water that does not attach the materials used either chemically or mechanically and does not contain any abrasive or long fibre particles

Technical data

• Mains connection 3~400 V, 50 / 60 Hz, depending on type also 1~230V, 50/60Hz
• Fuse A, AC 3 on mains side corresponding to motor power and utility regulations
• Max. fluid temperature. 70 C
• Operating pressure 10 bar
• Inlet pressure 6 bar
• Nominal connection widths on suction side R 2 DN 100
• Nominal connection widths on pressure side R 2 DN 100
• Protection class IP 54

Source: www.tiarasakti.co.id

WILO-Comfort CO/COR MVI

Pressure boosting system with 2 t0 6 non-self-riming stainless steel high pressure centrifugal pumps connected in parallel

• Fully automatic water supply and pressure boosting in residential, office and administration buildings, hotels, hospitals, stores and also in industrial systems
• Pumping of drinking water and process water, cooling water, fire-fighting or other process water that does not attach the materials used either chemically or mechanically and does not contain any abrasive or long fibre particles

Technical data

• Mains connection 3~230 V / 400 V, 50 Hz
• Fuse A, AC 3 on mains side corresponding to motor power and utility regulations
• Max. fluid temperature. 70 C
• Operating pressure 16 bar
• Inlet pressure 10 bar
• Nominal connection widths R 2 DN 250
• Protection class IP 54

Source: www.tiarasakti.co.id

WILO: BAC

Glanded pump, monobloc design with screwed or Victaulic connection

For pumping water/glycol mixtures with 20 - 40 Vol-% glycol

Technical data

• Permitted temperature range -15 °C to +60 °C
• Mains connection 3~400 V, 50 Hz
• Protection class IP 54
• Nominal width: G2/G 1 1/2 or Victaulic connection 60.3/48.3 mm
• Max. operating pressure 6 bar

Materials

• Pump housing and lantern: PA 6.6 50% GF
• Impeller: GFN 3l
• Shaft: X30Cr13
• Mechanical seal: Pressure resin impregnated carbon/aluminium oxide/EPDM

Source: www.tiarasakti.co.id