Wilo: Wilo-Comfort-Vario COR-1 MVIE/GE

Wilo-Comfort-Vario COR-1 MVIE/GE

Water supply plants with a non-self-priming high pressure centrifugal pump and integrated speed control

• Fully automatic water supply in pressure operation from the public water mains or a storage tank
• Pumping of drinking water, process water, cooling water, fire-fighting or other process water that does not attack the materials used chemically or mechanically and does not contain any abrasive or long fibre particles

Technical data

• Mains connection 3~400 V, 50/60 Hz or depending on type also 1~230V, 50/60Hz
• Max. fluid temperature. 70 C
• Operating pressure 16 bar
• Inlet pressure 10 bar
• Nominal connection width on suction side Rp 1 1/4 Rp 2
• Nominal connection width on pressure side Rp 1 1/4 Rp 1 1/2
• Protection class IP 54

Materials

• Impellers stainless steel 1.4301/1.4404
• Stage chambers stainless steel 1.4301/1.4404
• Pump housing stainless steel 1.4301/1.4404 or cast iron
• Shaft stainless steel 1.4057/1.4404
• Seals EPDM (EP851)/Viton
• Mechanical seal tungsten carbide/carbon / SiC/carbon
• Pressure jacket stainless steel 1.4301 / 1.4404
• Bearing tungsten carbide
• Pump foot FGL 250/316

Source: www.tiarasakti.co.id

Wilo:Wilo-Comfort-Vario COR-1 MHIE/GE

Wilo-Comfort-Vario COR-1 MHIE/GE

Water supply plants with a non-self-priming high pressure centrifugal pump and integrated speed control

• Fully automatic water supply in pressure operation from the public water mains or a storage tank
• Pumping of drinking water, process water, cooling water, fire-fighting or other process water that does not attack the materials used chemically or mechanically and does not contain any abrasive or long fibre particles

Technical data

• Mains connection 3~400 V, 50/60 Hz or depending on type also 1~230V, 50/60Hz
• Max. fluid temperature. 70 C
• Operating pressure 10 bar
• Inlet pressure 6 bar
• Nominal connection widths on suction side Rp 1 Rp 2
• Nominal connection widths on pressure side Rp 1 1/4 Rp 2 1/2
• Protection class IP 54

Materials

• Impellers stainless steel 1.4301/1.4404
• Stage chambers stainless steel 1.4301/1.4404
• Pump housing stainless steel 1.4301/1.4404
• Shaft stainless steel 1.4404
• Seals EPDM (EP851)/Viton
• Housing cover stainless steel 1.4301/1.4404
• Mechanical seal tungsten carbide/carbon
• Pressure jacket stainless steel 1.4301 / 1.4404
• Bearing tungsten carbide
• Pump foot aluminium

Source: www.tiarasakti.co.id

Wilo:Wilo-Comfort-Vario COR MVIE/VR

Wilo-Comfort-Vario COR MVIE/VR

Pressure boosting system with 2 to 4 non-self-priming stainless steel high pressure centrifugal pumps connected in parallel equipped with speed-controlled motors

• Fully automatic water supply and pressure boosting in residential, office and administration buildings, hotels, hospitals, stores and also in industrial systems
• Pumping of drinking water and process water, cooling water, fire-fighting or other process water that does not attach the materials used either chemically or mechanically and does not contain any abrasive or long fibre particles

Technical data

• Mains connection 3~400 V, 50 / 60 Hz, depending on type also 1~230V, 50/60Hz
• Fuse A, AC 3 on mains side corresponding to motor power and utility regulations
• Max. fluid temperature. 70 C
• Operating pressure 16 bar
• Inlet pressure 10 bar
• Nominal connection widths R/Rp 2 DN 150
• Protection class IP 54

Materials

MVIE 2.. up to 16..6

• Impellers and stage chambers stainless steel 1.4301/1.4404 (MVI 16..6 only in 1.4301)
• Pump housing stainless steel 1.4301/1.4404
• Shaft depending on type, stainless steel 1.4301/1.4404
• Seal EPDM (EP 851) / Viton
• Housing cover stainless steel 1.4301/1.4404
• Lower part of housing stainless steel 1.4301 / 1.4404
• Mechanical seal B - carbon/tungsten carbide, SiC/carbon
• Pressure jacket stainless steel 1.4301 / 1.4404
• Bearing tungsten carbide
• Pump foot ENGJL250

from MVIE 16..

• Impellers stainless steel 1.4301/1.4404
• Stage chambers stainless steel 1.4301/1.4404
• Pump housing ENGJL250 / 1.4404
• Shaft depending on type stainless steel 1.4057 / 1.4404
• Seal EPDM (EP 851) / Viton
• Housing cover stainless steel 1.4301/1.4404
• Lower part of housing stainless steel 1.4301 / 1.4404
• Mechanical seal B - carbon/tungsten carbide, SiC/carbon
• Pressure jacket stainless steel 1.4301 / 1.4404
• Bearing tungsten carbide
• Pump base depending on type ENGJL250 / 1.4408

Source: www.tiarasakti.co.id

Wilo: Wilo-Comfort-N-Vario COR-1 MVISE/GE

Wilo-Comfort-N-Vario COR-1 MVISE/GE

Water supply plants with a non-self-priming glandless high pressure centrifugal pump and integrated speed control

• Fully automatic water supply in pressure operation from the public water mains or a storage tank
• Pumping of drinking water, process water, cooling water, fire-fighting or other process water that does not attack the materials used chemically or mechanically and does not contain any abrasive or long fibre particles

Technical data

• Mains connection 3~400 V, 50 Hz
• Max. fluid temperature 50 C
• Operating pressure 16 bar
• Inlet pressure 6 bar
• Nominal connection widths Rp 1 1/4 Rp 1 1/2
• Protection class IP 44

Materials

• Impellers stainless steel 1.4301
• Stage chambers stainless steel 1.4301
• Pump housing stainless steel 1.4301
• Shaft stainless steel 1.4122
• Seals EPDM (EP851)
• Housing cover stainless steel 1.4301
• Lower part of housing stainless steel 1.4301
• Pressure jacket stainless steel 1.4301
• Bearing carbon, impregnated with synthetic resin
• Pump foot FGL 250

Source: www. tiarasakti.co.id

WILO: WILO-Comfort-N-Vario COR MVISE/VR

Wilo-Comfort-N-Vario COR MVISE/VR

Pressure boosting system with 2 to 4 non-self-priming stainless steel high pressure centrifugal pumps connected in parallel equipped with speed-controlled glandless motor

• Fully automatic water supply and pressure boosting in residential, office and administration buildings, hotels, hospitals, stores and also in industrial systems
• Pumping of drinking water and process water, cooling water, fire-fighting or other process water that does not attach the materials used either chemically or mechanically and does not contain any abrasive or long fibre particles

Special features/Product advantages

• More or less noise-free system through 2 - 4 stainless steel glandless high pressure centrifugal pumps connected in parallel and equipped with integrated water-cooled frequency converter
• up to 20 dB[A] quieter than conventional systems with comparable hydraulic power
• Control bandwidth of frequency converter from 20 to 50 Hz
• Reliable through the use of pump series MVISE with integrated dry-running detection and automatic de-activation if the water level is low

Technical data

• Mains connection 3~400 V, 50 Hz
• Fuse A, AC 3 on mains side corresponding to motor power and utility regulations
• Max. fluid temperature 50 C
• Operating pressure 16 bar
• Inlet pressure 6 bar
• Nominal connection widths R/Rp 2 DN 80
• Protection class IP 44

Materials

• Impellers stainless steel 1.4301
• Stage chambers stainless steel 1.4301
• Pump housing stainless steel 1.4301
• Shaft stainless steel 1.4122
• Seals EPDM (EP851)
• Housing cover stainless steel 1.4301
• Lower part of housing stainless steel 1.4301
• Pressure jacket stainless steel 1.4301
• Bearing carbon, impregnated with synthetic resin
• Pump foot FGL 250

Source: www.tiarasakti.co.id

WILO: Veroline-IPL

Glanded pump, inline design with screwed or flange connection.

For pumping cold and hot water (according to VDI 2035) without abrasive substances in heating water, cold water and cooling water systems.

Special features/Product advantages:
* Long motor life guaranteed by standard condensate drainage holes in the motor housings
* Version series: Shaft with one-piece shaft
* Version N: Standard motor B5 or V1

Technical data:
* Permitted temperature range -10 to +120 celcius degree
* Mains connection 3 phase, 400V, 50Hz
* Protection class IP55
* Nominal width Rp 1 DN 100
* Max. operating pressure 10 bar (special version: 16 bar)

Source: www.tiarasakti.co.id