Wilo: Wilo-Comfort-Vario COR-1 MVIE/GE

Wilo-Comfort-Vario COR-1 MVIE/GE

Water supply plants with a non-self-priming high pressure centrifugal pump and integrated speed control

• Fully automatic water supply in pressure operation from the public water mains or a storage tank
• Pumping of drinking water, process water, cooling water, fire-fighting or other process water that does not attack the materials used chemically or mechanically and does not contain any abrasive or long fibre particles

Technical data

• Mains connection 3~400 V, 50/60 Hz or depending on type also 1~230V, 50/60Hz
• Max. fluid temperature. 70 C
• Operating pressure 16 bar
• Inlet pressure 10 bar
• Nominal connection width on suction side Rp 1 1/4 Rp 2
• Nominal connection width on pressure side Rp 1 1/4 Rp 1 1/2
• Protection class IP 54

Materials

• Impellers stainless steel 1.4301/1.4404
• Stage chambers stainless steel 1.4301/1.4404
• Pump housing stainless steel 1.4301/1.4404 or cast iron
• Shaft stainless steel 1.4057/1.4404
• Seals EPDM (EP851)/Viton
• Mechanical seal tungsten carbide/carbon / SiC/carbon
• Pressure jacket stainless steel 1.4301 / 1.4404
• Bearing tungsten carbide
• Pump foot FGL 250/316

Source: www.tiarasakti.co.id

Wilo:Wilo-Comfort-Vario COR-1 MHIE/GE

Wilo-Comfort-Vario COR-1 MHIE/GE

Water supply plants with a non-self-priming high pressure centrifugal pump and integrated speed control

• Fully automatic water supply in pressure operation from the public water mains or a storage tank
• Pumping of drinking water, process water, cooling water, fire-fighting or other process water that does not attack the materials used chemically or mechanically and does not contain any abrasive or long fibre particles

Technical data

• Mains connection 3~400 V, 50/60 Hz or depending on type also 1~230V, 50/60Hz
• Max. fluid temperature. 70 C
• Operating pressure 10 bar
• Inlet pressure 6 bar
• Nominal connection widths on suction side Rp 1 Rp 2
• Nominal connection widths on pressure side Rp 1 1/4 Rp 2 1/2
• Protection class IP 54

Materials

• Impellers stainless steel 1.4301/1.4404
• Stage chambers stainless steel 1.4301/1.4404
• Pump housing stainless steel 1.4301/1.4404
• Shaft stainless steel 1.4404
• Seals EPDM (EP851)/Viton
• Housing cover stainless steel 1.4301/1.4404
• Mechanical seal tungsten carbide/carbon
• Pressure jacket stainless steel 1.4301 / 1.4404
• Bearing tungsten carbide
• Pump foot aluminium

Source: www.tiarasakti.co.id

Wilo:Wilo-Comfort-Vario COR MVIE/VR

Wilo-Comfort-Vario COR MVIE/VR

Pressure boosting system with 2 to 4 non-self-priming stainless steel high pressure centrifugal pumps connected in parallel equipped with speed-controlled motors

• Fully automatic water supply and pressure boosting in residential, office and administration buildings, hotels, hospitals, stores and also in industrial systems
• Pumping of drinking water and process water, cooling water, fire-fighting or other process water that does not attach the materials used either chemically or mechanically and does not contain any abrasive or long fibre particles

Technical data

• Mains connection 3~400 V, 50 / 60 Hz, depending on type also 1~230V, 50/60Hz
• Fuse A, AC 3 on mains side corresponding to motor power and utility regulations
• Max. fluid temperature. 70 C
• Operating pressure 16 bar
• Inlet pressure 10 bar
• Nominal connection widths R/Rp 2 DN 150
• Protection class IP 54

Materials

MVIE 2.. up to 16..6

• Impellers and stage chambers stainless steel 1.4301/1.4404 (MVI 16..6 only in 1.4301)
• Pump housing stainless steel 1.4301/1.4404
• Shaft depending on type, stainless steel 1.4301/1.4404
• Seal EPDM (EP 851) / Viton
• Housing cover stainless steel 1.4301/1.4404
• Lower part of housing stainless steel 1.4301 / 1.4404
• Mechanical seal B - carbon/tungsten carbide, SiC/carbon
• Pressure jacket stainless steel 1.4301 / 1.4404
• Bearing tungsten carbide
• Pump foot ENGJL250

from MVIE 16..

• Impellers stainless steel 1.4301/1.4404
• Stage chambers stainless steel 1.4301/1.4404
• Pump housing ENGJL250 / 1.4404
• Shaft depending on type stainless steel 1.4057 / 1.4404
• Seal EPDM (EP 851) / Viton
• Housing cover stainless steel 1.4301/1.4404
• Lower part of housing stainless steel 1.4301 / 1.4404
• Mechanical seal B - carbon/tungsten carbide, SiC/carbon
• Pressure jacket stainless steel 1.4301 / 1.4404
• Bearing tungsten carbide
• Pump base depending on type ENGJL250 / 1.4408

Source: www.tiarasakti.co.id

Wilo: Wilo-Comfort-N-Vario COR-1 MVISE/GE

Wilo-Comfort-N-Vario COR-1 MVISE/GE

Water supply plants with a non-self-priming glandless high pressure centrifugal pump and integrated speed control

• Fully automatic water supply in pressure operation from the public water mains or a storage tank
• Pumping of drinking water, process water, cooling water, fire-fighting or other process water that does not attack the materials used chemically or mechanically and does not contain any abrasive or long fibre particles

Technical data

• Mains connection 3~400 V, 50 Hz
• Max. fluid temperature 50 C
• Operating pressure 16 bar
• Inlet pressure 6 bar
• Nominal connection widths Rp 1 1/4 Rp 1 1/2
• Protection class IP 44

Materials

• Impellers stainless steel 1.4301
• Stage chambers stainless steel 1.4301
• Pump housing stainless steel 1.4301
• Shaft stainless steel 1.4122
• Seals EPDM (EP851)
• Housing cover stainless steel 1.4301
• Lower part of housing stainless steel 1.4301
• Pressure jacket stainless steel 1.4301
• Bearing carbon, impregnated with synthetic resin
• Pump foot FGL 250

Source: www. tiarasakti.co.id

WILO: WILO-Comfort-N-Vario COR MVISE/VR

Wilo-Comfort-N-Vario COR MVISE/VR

Pressure boosting system with 2 to 4 non-self-priming stainless steel high pressure centrifugal pumps connected in parallel equipped with speed-controlled glandless motor

• Fully automatic water supply and pressure boosting in residential, office and administration buildings, hotels, hospitals, stores and also in industrial systems
• Pumping of drinking water and process water, cooling water, fire-fighting or other process water that does not attach the materials used either chemically or mechanically and does not contain any abrasive or long fibre particles

Special features/Product advantages

• More or less noise-free system through 2 - 4 stainless steel glandless high pressure centrifugal pumps connected in parallel and equipped with integrated water-cooled frequency converter
• up to 20 dB[A] quieter than conventional systems with comparable hydraulic power
• Control bandwidth of frequency converter from 20 to 50 Hz
• Reliable through the use of pump series MVISE with integrated dry-running detection and automatic de-activation if the water level is low

Technical data

• Mains connection 3~400 V, 50 Hz
• Fuse A, AC 3 on mains side corresponding to motor power and utility regulations
• Max. fluid temperature 50 C
• Operating pressure 16 bar
• Inlet pressure 6 bar
• Nominal connection widths R/Rp 2 DN 80
• Protection class IP 44

Materials

• Impellers stainless steel 1.4301
• Stage chambers stainless steel 1.4301
• Pump housing stainless steel 1.4301
• Shaft stainless steel 1.4122
• Seals EPDM (EP851)
• Housing cover stainless steel 1.4301
• Lower part of housing stainless steel 1.4301
• Pressure jacket stainless steel 1.4301
• Bearing carbon, impregnated with synthetic resin
• Pump foot FGL 250

Source: www.tiarasakti.co.id

WILO: Veroline-IPL

Glanded pump, inline design with screwed or flange connection.

For pumping cold and hot water (according to VDI 2035) without abrasive substances in heating water, cold water and cooling water systems.

Special features/Product advantages:
* Long motor life guaranteed by standard condensate drainage holes in the motor housings
* Version series: Shaft with one-piece shaft
* Version N: Standard motor B5 or V1

Technical data:
* Permitted temperature range -10 to +120 celcius degree
* Mains connection 3 phase, 400V, 50Hz
* Protection class IP55
* Nominal width Rp 1 DN 100
* Max. operating pressure 10 bar (special version: 16 bar)

Source: www.tiarasakti.co.id

Wilo-EMU KS

Submersible wastewater pump

• For draining excavation pits, basements, shafts and basins
• Intended for use in wells

Technical data

• Mains connection 1~230 V, 50 Hz or 3~400 V, 50 Hz
• Protection class IP 68
• Submersion depth 12 m max.
• Fluid temperature 40 °C max.
• Cable length 10 m
• Free ball passage depending on type, 5 mm - 10 mm
• Pressure port depending on type Rp 1 1/4, Rp 2 or Rp 3

Materials

• Motor: cast aluminium
• Pump: cast iron
• Impeller: cast iron
• Shaft: 1.4021
• Mechanical seal on motor side: steatite/carbon (KS 8 / KS 9 / KS 14 / KS 15), carbon/aluminium oxide (KS 24)
• Mechanical seal on pump side: SiC/SiC
• Static seals: NBR

Source: www.tiarasakti.co.id

Wilo-P

Glandless pump with screwed or flange connection. Pre-selectable speed stages for capacity adjustment

Hot-water heating systems of all kinds, industrial circulation systems

Technical data

• Permitted temperature range +20 °C to +130 °C; in short-term operation (2 h) +140 °C
• Mains connection 3~400 V, 50 Hz (P 40/100r also 1~230 V, 50 Hz)
• Protection class IP 42
• Nominal width DN 40 to DN 100
• Max. operating pressure 6 bar or 10 bar, also optional up to 16 bar

Materials

• Pump housing: cataphoretic coated cast iron
• Impeller: plastic/cast iron
• Shaft: stainless steel
• Bearing: metal-impregnated carbon

Source: www.tiarasakti.co.id

Wilo-Star-RS (ClassicStar)

Glandless circulation pump with screwed connection. RSL version with rapid ventilation connection. Pre-selectable speed stages to adjust the capacity

Hot-water heating systems of all kinds, industrial circulation systems, cold-water systems and air-conditioning systems

Technical data

• Permitted temperature range -10 °C to +110 °C
• Mains connection 1~230 V, 50 Hz
• Protection class IP 44
• Nominal width Rp 1/2, Rp 1 or Rp 1 1/2
• Max. operating pressure 10 bar

Materials

• Pump housing: Grey cast iron (EN-GJL200)
• Impeller: Plastic (PP - 40% GF)
• Shaft: Stainless steel ( Cr)
• Bearing: Metal-impregnated carbon

Source: www.tiarasakti.co.id

Wilo-VeroLine-IP-E

Electronically controlled glanded pump, inline design with flange connection and automatic output adaption

For pumping cold and hot water (according to VDI 2035) without abrasive substances in heating water, cold water and cooling water systems

Technical data

• Permitted temperature range -10 °C to +120 °C
• Mains connection 3~400 V, 50 Hz
• Protection class IP 55
• Nominal width DN 32 to DN 80
• Max. operating pressure 10 bar (special version: 16 bar)

Materials

• Pump housing and lantern: EN-GJL-250
• Impeller: PP, glass fibre reinforced
• Shaft: 1.4021
• Mechanical seal: AQ1EGG other mechanical seals on request

Source: www.tiarasakti.co.id

Wilo-VeroNorm-IP-Z

Glanded circulation pump, inline design with screwed connection

For pumping drinking water and also cold and hot water (according to VDI 2035) without abrasive substances in heating water, cold water and cooling water systems

Technical data

• permitted temperature range
• Drinking water up to 28 °d: max. +65 °C, in short-term operation (2 h) up to +110 °C
• Heating water: -8 °C to +110 °C
• Mains connection 1~230 V, 50 Hz,3 ~400 V, 50 Hz
• Protection class IP 44 motor, IP 54 terminal box
• Nominal width Rp 1
• Max. operating pressure 10 bar

Materials

• Pump housing and lantern: 1.4306
• Impeller: Noryl
• Shaft: 1.4571
• Mechanical seal: ceramic/graphite/EPDM

Source: www.tiarasakti.co.id

WILO-VeroNorm NP

Single-stage low pressure centrifugal pump mounted on base plate

• Pumping heating water according to VDI 2035, water-glycol mixtures, cooling, cold and process water
• Applications in municipal water supply, irrigation, building service, general industry, power stations, etc.

Materials

• Pump housing: ENGJL250
• Impeller: ENGJL25, optional bronze CuSn80
• Shaft: X30Cr13
• Mechanical seal: AQ1EGG

Source: www.tiarasakti.co.id

WILO-VeroNorm NPG

Single-stage low pressure centrifugal pump mounted on base plate

• Pumping heating water according to VDI 2035, water-glycol mixtures, cooling, cold and process water
• Applications in municipal water supply, irrigation, building service, general industry, power stations, etc.

Materials

• Pump housing: ENGJL250
• Impeller: ENGJL250
• Shaft: depending on type X30Cr13

Source: www.tiarasakti.co.id

WILO-VeroTwin-DP-E

Electronically controlled glanded twin-head pump, inline design with flange connection and automatic output adaption.

For pumping cold and hot water (according to VDI 2035) without abrasive substances in heating water, cold water and cooling water systems

Technical Data

• Permitted temperature range -10 °C to +120 °C
• Mains connection 3~400 V, 50 Hz
• Protection class IP 55
• Nominal width DN 32 to DN 80
• Max. operating pressure 10 bar (special version: 16 bar)

Materials

• Pump housing and lantern: EN-GJL-250
• Impeller: PP, glass fibre reinforced
• Shaft: 1.4021
• Mechanical seal: AQ1EGG; other mechanical seals on request

Source: www.tiarasakti.co.id

WILO-VEROTwin-DPL

Glanded twin-head pump, inline design with flange connection

For pumping cold and hot water (according to VDI 2035) without abrasive substances in heating water, cold water and cooling water systems.

Technical Data

• Permitted temperature range -10 °C to +120 °C
• Mains connection 3~400 V, 50 Hz
• Protection class IP 55
• Nominal width Rp 1 to DN 100
• Max operating pressure 10 bar (special version: 16 bar

Material

• Pump housing and lantern: EN-GJL-250
• Impeller: Plastic / EN-GJL-200 (depending on pump type)
• Shaft: 1.4021 (Version N: 1.4404)
• Mechanical seal: AQ1EGG; other mechanical seals on request

Source: www.tiarasakti.co.id

WILO: Magnet Pump

Application:
* Circulation and transference of chemical liquid
* Filter treatment such as dyeing equipment
* Etching equipment for electronic parts
* Constant temperature bath and ion analyzer

Features:
* Non seal type (magnet drive): No leakage

Advantages:
* ong-lasting by adopting a closed motor

Benefits:
* Suitable to handle dilute acid liquid

Source: www.tiarasakti.co.id

WILO: Cronoline IL

Glanded pump, inline design with flange connection

For pumping cold and hot water (according to VDI 2035) without abrasive substances in heating water, cold water and cooling water systems

Technical data

• Permitted temperature range -20 °C to +140 °C
• Mains connection 3~400 V, 50 Hz
• Protection class IP 55
• Nominal width DN 32 to DN 250
• Max. operating pressure 16 bar

Materials

• Pump housing and lantern: Standard: EN-GJL-250; optional spheroidal graphite iron EN-GJS-400-18-LT
• Impeller: Standard: EN-GJL-200; Special version: Red bronze G-CuSn 10
• Shaft: 1.4122
• Mechanical seal: AQ1EGG; other mechanical seals on request

Source: www.tiarasakti.co.id

WILO: Cronobloc BL

Glanded pump, monobloc design with flange connection

For pumping cold and hot water (according to VDI 2035) without abrasive substances in heating water, cold water and cooling water systems

Technical data

• Permitted temperature range -20 °C to +140 °C
• Mains connection 3~400 V, 50 Hz
• Protection class IP 55
• Nominal width DN 32 to DN 150
• Max. operating pressure 16 bar

Materials

• Pump housing and lantern: Standard: EN-GJL-250; optional spheroidal graphite iron EN-GJS-400-18-LT
• Impeller: Standard: EN-GJL-200; Special version: Red bronze G-CuSn 10
• Shaft: 1.4122
• Mechanical seal: AQ1EGG; other mechanical seals on request

Source: www.tiarasakti.co.id

WILO-Comfort-Vario COR MHIE/VR

Pressure boosting system with 2 to 4 non-self-priming stainless steel high pressure centrifugal pumps connected in parallel equipped with speed-controlled motors

• Fully automatic water supply and pressure boosting in residential, office and administration buildings, hotels, hospitals, stores and also in industrial systems
• Pumping of drinking water and process water, cooling water, fire-fighting or other process water that does not attach the materials used either chemically or mechanically and does not contain any abrasive or long fibre particles

Technical data

• Mains connection 3~400 V, 50 / 60 Hz, depending on type also 1~230V, 50/60Hz
• Fuse A, AC 3 on mains side corresponding to motor power and utility regulations
• Max. fluid temperature. 70 C
• Operating pressure 10 bar
• Inlet pressure 6 bar
• Nominal connection widths on suction side R 2 DN 100
• Nominal connection widths on pressure side R 2 DN 100
• Protection class IP 54

Source: www.tiarasakti.co.id

WILO-Comfort CO/COR MVI

Pressure boosting system with 2 t0 6 non-self-riming stainless steel high pressure centrifugal pumps connected in parallel

• Fully automatic water supply and pressure boosting in residential, office and administration buildings, hotels, hospitals, stores and also in industrial systems
• Pumping of drinking water and process water, cooling water, fire-fighting or other process water that does not attach the materials used either chemically or mechanically and does not contain any abrasive or long fibre particles

Technical data

• Mains connection 3~230 V / 400 V, 50 Hz
• Fuse A, AC 3 on mains side corresponding to motor power and utility regulations
• Max. fluid temperature. 70 C
• Operating pressure 16 bar
• Inlet pressure 10 bar
• Nominal connection widths R 2 DN 250
• Protection class IP 54

Source: www.tiarasakti.co.id

WILO: BAC

Glanded pump, monobloc design with screwed or Victaulic connection

For pumping water/glycol mixtures with 20 - 40 Vol-% glycol

Technical data

• Permitted temperature range -15 °C to +60 °C
• Mains connection 3~400 V, 50 Hz
• Protection class IP 54
• Nominal width: G2/G 1 1/2 or Victaulic connection 60.3/48.3 mm
• Max. operating pressure 6 bar

Materials

• Pump housing and lantern: PA 6.6 50% GF
• Impeller: GFN 3l
• Shaft: X30Cr13
• Mechanical seal: Pressure resin impregnated carbon/aluminium oxide/EPDM

Source: www.tiarasakti.co.id

Submersible motor pump

Applications:
* For water supply, irrigation and watering, pressure boosting, reducing the groundwater level and industrial applications

* For pumping water without long fibrous and abrasive particles from storage tanks or boreholes with a minimum diameter of 4" (=DN 100) and a maximum immersion depth of up to 350 m.

Technical data

* Mains connection 1~230 V, 50 Hz / 3~400 V, 50 Hz
* Fluid temperature +3 to + 30 C
* Max. immersion depth 350 m
* Max. sand content 80 g/m
* Water speed min. 8 cm/s
* Starts per hour, max. 20
* Protection class IP 58
* Connections: pressure pipe depending on type Rp 1 1/4 or Rp 2

Source: www.tiarasakti.co.id

Non-self priming, multi-stage pump with inverter

Application: Pump for use in conjunction with water supply and pressure boosting, fire services, industrial circulation sytems, boiler feed systems, process engineering, cooling water circuits, wash and sprinkler systems.

Approved fluids:
* drinking & domestic hot and cold water
* cooling water
* fire service or other process water which are not chemically or mechanically aggressive and do not contain any abrasive or long fibrous particles.

Source: www.tiarasakti.co.id

Non self-priming multi-stage pump

Application: Pump suitable for water supply and pressure boosting duties, fire services, boiler feed, industrial circulating systems, process engineering, cooling water systems, pressure cleaning and sprinkler systems.

Motor:
IEC-standards three phase motor, V 18 frame up to size 5.5 kW, V 1 frame for 7.5 kW and larger.

Source: www.tiarasakti.co.id

Split Case Pump

ASP series pumps are suitable to handle clean or slightly soiled water (max. 20 ppm) without solid matter for circulating, transfer and booster duties.
* Industries & water works
* Irrigation, sprinkler system
* Hot & cold water circulation
* Air - conditioning plant
* Community & commercial water supply
* Fire fighting

Source: www.tiarasakti.co.id

Non self-priming multi-stage pump

Applications: water supply and pressure boosting, universably applicable pump for trade and industry, cooling water circuits, pressure cleaning and sprinkler systems.

Motor: TEFC three phase flange mounted motor with extended shaft. Single phase motors with integrated overload protection.

Source: www.tiarasakti.co.id